Features

Design benefits

warmth

Comfort from 5°C to -5°C.Wadding, good fill power (125g/m²).Jacket hem drawcord

compact design

Easily folds away into its left-hand pocket using a zip with double puller

water repellent

Surface-treated outer fabric to prevent water from getting in

pockets

2 zipped hand pockets

Design details

Thermal insulation - Warmth

This padded jacket has been certified for a comfort temperature of -5°C during a standardised test in a thermal chamber. The model is wearing a synthetic long-sleeved t-shirt and a light fleece underneath. It works with a simulated 5 km/h wind. In our heat comparison tool, it represents 2 stars.

Functions

- Inside flap under the zip that protects from the wind. - Elasticised cuffs. - Flap at the top of the collar to protect the chin. - Tightening with an elastic cord and toggle at the hem. - Hood with elasticated bias binding.

Technical information on the wadding

We use 100% polyester wadding weighing 125 g/sqm in the body section and 100 g/sqm in the sleeves and hood. The wadding is made from silicone-coated spiral fibres that make it highly compressible and highly durable. Despite its low thickness, it has high insulation properties thanks to the air trapped inside, and remains lightweight. It retains its warmth even when wet.

Durable materials

This polyamide canvas uses 20 denier threads (measurement unit of the thread) and resists up to 20,000 abrasion cycles. Durability is calculated using the Martindale test, Standard 12 947-2. This test is to rub the jacket’s material against another material to observe how the product resists wear. Outer: 100% polyamide fabric 39g/sqm, 20 denier Lining: 100% polyester fabric 35g/sqm, mix of 15 to 20 denier threads

Water repellent property of component (not to be confused with waterproofing)

The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. This prevents the fabric from swelling, and keeps it lightweight and warm. The water repellent property is achieved by treating the fabric's exterior. This treatment must be renewed throughout the garment's lifespan (recommended after each wash). Water repellent treatment products are available in our stores.

How to restore water-repellent properties?

Once you have cleaned your padded jacket, we recommend you use a water-repellent reactivator spray to preserve the hydrophobic properties of the outer fabric. This renews the fabric’s water repellent properties and optimises performance throughout the lifespan of your garment. You will find it in stores and on our website by entering the code 8554908

A precious tip for looking after your down jacket!

In general, do not wash a down jacket too frequently because each wash decreases its thermal properties.

Does your down jacket have a snag? How to repair it

A tear on a padded jacket may happen when trekking. The good news is that it can be repaired! You can either mend it or apply a heat-bonded patch so that the tear doesn't get any bigger and the synthetic fibres escape. Don't you feel at ease carrying out this repair yourself? Don't worry! Our in-store Decathlon workshops offer a repair service for your padded jackets.

frequency	occasional
fit	fitted
number of pockets	2 pockets
storage	stows in his pocket
main material	synthetic
hood	with hood
pocket	zip closed pocket, with pocket
waterproof	water repellent
style	plain
type of length	at the hips
condition	new
windproof	not windproof
air temperature	- 5°C
sleeves length	long sleeves
thumb pass	without thumb pass

Raw material	80.251%
Manufacturing	4.629%
Packaging	1.163%
Distribution	7.266%
Use	4.514%
End of life	2.176%

Women's Mountain Trekking Padded Jacket with Hood - MT100 -5°C

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Cleaning

Environmental impact

Carbon footprint